Out of stock
Want to be notified when this product is back in stock?
FROM PSA:
Barrel Length: 20”
Barrel Material: 416R Stainless
Barrel Finish: Black Nitride
Chamber: .223 Wylde
Twist Rate: 1:8
Muzzle Device: Sabre Compensator
Extension: M4
Gas System: Mid-Length
Gas Block Type: Adjustable
Upper Receiver: Billet
Receiver Style: Sabre M4 Flat top with feed ramps and Engraved T-Marks
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Timbercreek E AR BCD
Handguard Style: PSA 18″ Knurled Slant Rail
BCG: Sabre Lightweight Carrier – Mag Phosphate Finish
Gas Rings: Sprinco Gas Rings
Bolt Steel: Carpenter 158
Bolt Carrier Steel: 8620
Staked Gas Key: Yes
Lower Receiver: Billet Lower with Ambi Bolt Release
Receiver Finish: Hardcoat Anodized
Fire Control Group: Sabre Two-Stage Black DLC Coated
Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
Buffer: H1
Stock: Sabre, Black
Grip: Sabre, Black
Magazine: (1) 30-Round Sabre Magazine (where available by law)
Barrel: 20″ 416R Stainless with black nitride finish barrel chambered in .223 Wylde, with a 1:8 twist rate, M4 barrel extension, and a mid-length gas system. This barrel is finished off with a 18” PSA Knurled Slant Rail and a Sabre muzzle device.
Upper: Billet AR upper is hard coat anodized. Uppers include forward assist and Timbercreek E AR BCD dust cover. These uppers are made for us right here in the USA.
Bolt Carrier Group: Sabre Lightweight Bolt Carrier Group. Shot-peened, mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications, fastened with Grade 8 screws, and Staked Per Mil-Spec. The carrier is made with 8620 steel. The Bolt Carrier Group is Mag Phosphate finish and includes Springco Gas Rings.
Lower: These billet lowers are quality made using 7075 aluminum and are marked “MULTI” for the caliber. The finish is hard-coat anodized. The lower comes with Battle Arms Pivot/Takedown Pins, Battle Arms Bolt Catch, Battle Arms Ambi-Mag release, Sabre 2-Stage DLC Trigger, Ambi-Bolt Release, and H1 Buffer.
FROM PSA:
Barrel Length: 20”
Barrel Material: 416R Stainless
Barrel Finish: Black Nitride
Chamber: .223 Wylde
Twist Rate: 1:8
Muzzle Device: Sabre Compensator
Extension: M4
Gas System: Mid-Length
Gas Block Type: Adjustable
Upper Receiver: Billet
Receiver Style: Sabre M4 Flat top with feed ramps and Engraved T-Marks
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Timbercreek E AR BCD
Handguard Style: PSA 18″ Knurled Slant Rail
BCG: Sabre Lightweight Carrier – Mag Phosphate Finish
Gas Rings: Sprinco Gas Rings
Bolt Steel: Carpenter 158
Bolt Carrier Steel: 8620
Staked Gas Key: Yes
Lower Receiver: Billet Lower with Ambi Bolt Release
Receiver Finish: Hardcoat Anodized
Fire Control Group: Sabre Two-Stage Black DLC Coated
Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
Buffer: H1
Stock: Sabre, Black
Grip: Sabre, Black
Magazine: (1) 30-Round Sabre Magazine (where available by law)
Barrel: 20″ 416R Stainless with black nitride finish barrel chambered in .223 Wylde, with a 1:8 twist rate, M4 barrel extension, and a mid-length gas system. This barrel is finished off with a 18” PSA Knurled Slant Rail and a Sabre muzzle device.
Upper: Billet AR upper is hard coat anodized. Uppers include forward assist and Timbercreek E AR BCD dust cover. These uppers are made for us right here in the USA.
Bolt Carrier Group: Sabre Lightweight Bolt Carrier Group. Shot-peened, mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications, fastened with Grade 8 screws, and Staked Per Mil-Spec. The carrier is made with 8620 steel. The Bolt Carrier Group is Mag Phosphate finish and includes Springco Gas Rings.
Lower: These billet lowers are quality made using 7075 aluminum and are marked “MULTI” for the caliber. The finish is hard-coat anodized. The lower comes with Battle Arms Pivot/Takedown Pins, Battle Arms Bolt Catch, Battle Arms Ambi-Mag release, Sabre 2-Stage DLC Trigger, Ambi-Bolt Release, and H1 Buffer.
| Brand | Palmetto State Armory |
|---|
