Out of stock
Want to be notified when this product is back in stock?
KM20214
Approx. 10″ length Free Float RAS Handguard
Rifle Requirements: This Free Float RAS requires that the rifle have a carbine or mid length gas system and a low profile gas block. Disassembly of the rifle’s gas system and removal of the factory barrel nut will be necessary. This forend uses a proprietary barrel nut that may be installed using a standard AR-15 armorer’s barrel nut wrench (sold separately). For AR-15/SR-15 based platforms only; not compatible with SR-25 variants. Installation instructions are included.
Free Float RAS Forend Assembly, Medium
P/N:20214
Length:
9.35″
Weight:
14.7 oz
Free Float:
Yes
Machined from lightweight aluminum with a black anodized finish, the KAC Free Float RAS Medium (P/N 20214) gives AR-15 and SR-15 builds a free-floating forend with full-length MIL-STD-1913 Picatinny rails at the 12, 3, 6 and 9 o’clock positions for lights, lasers, grips and optics. At 9.35″ and 14.7 oz, it is sized for carbine and mid-length gas systems and requires a low-profile gas block. Installation replaces the factory barrel nut with Knight’s proprietary nut, tightened with a standard AR-15 armorer’s wrench (sold separately). Not compatible with SR-25 variants. Browse more handguards at Gallenson’s Guns.
KM20214
Approx. 10″ length Free Float RAS Handguard
Rifle Requirements: This Free Float RAS requires that the rifle have a carbine or mid length gas system and a low profile gas block. Disassembly of the rifle’s gas system and removal of the factory barrel nut will be necessary. This forend uses a proprietary barrel nut that may be installed using a standard AR-15 armorer’s barrel nut wrench (sold separately). For AR-15/SR-15 based platforms only; not compatible with SR-25 variants. Installation instructions are included.
Free Float RAS Forend Assembly, Medium
P/N:20214
Length:
9.35″
Weight:
14.7 oz
Free Float:
Yes
Machined from lightweight aluminum with a black anodized finish, the KAC Free Float RAS Medium (P/N 20214) gives AR-15 and SR-15 builds a free-floating forend with full-length MIL-STD-1913 Picatinny rails at the 12, 3, 6 and 9 o’clock positions for lights, lasers, grips and optics. At 9.35″ and 14.7 oz, it is sized for carbine and mid-length gas systems and requires a low-profile gas block. Installation replaces the factory barrel nut with Knight’s proprietary nut, tightened with a standard AR-15 armorer’s wrench (sold separately). Not compatible with SR-25 variants. Browse more handguards at Gallenson’s Guns.
| Material | Aluminum |
|---|---|
| Finish | Black Anodized |
| Length | 9.35″ |
| Rail Type | MIL-STD-1913 Picatinny Quad Rail |
| Gas System | Carbine or Mid-Length |
| Platform | AR-15 / SR-15 |
| Manufacturer Part # | KM20214 |
